The Overlooked Power in Corrosion Protection When it comes to protective coatings, the topcoat often steals the spotlight — but it’s the primer that quietly carries much of the responsibility for long-term corrosion protection. As Teknos corrosion protection specialist Tomi Kontunen explains, “A good primer doesn’t just help paint stick – it actively fights corrosion. […]
Corrodere Academy is delighted to announce that JMK Training has become the official Global Support Partner for Australia. JMK Training were already a trusted Affiliate Training Provider, but with this expanded role they now deliver the full suite of Corrodere Academy courses — including Train the painter, inspection, and specialist programmes. We spoke with JMK […]
Read More… from JMK Training – Global Support Partner Australia
The cruise industry is under increasing scrutiny to reduce its environmental footprint while maintaining high levels of operational performance. Frequent voyages in warm waters, where fouling pressure is at its highest, create challenges that directly impact both fuel efficiency and sustainability targets. In response, Hempel has unveiled Hempaguard Ultima, a next-generation hull coating designed specifically […]
Corrodere Academy partners with Challengers to support local children We’re proud to announce Challengers as Corrodere Academy’s official charity partner. Based in Guildford and Farnham, UK, Challengers is a fantastic organisation that provides inclusive play and leisure opportunities for disabled children and young people. At Corrodere, we believe in using our platform to support causes […]
Since 2021, Denholm Industrial Services has been a registered Train the painter company, delivering accredited training in-house to their employees. Their commitment ensures the workforce continues to meet industry standards, while also supporting professional development across the business. We’re thrilled to share that Denholm Industrial Services has recently renewed their Train the painter registration for […]
As featured in Protective Coatings Expert magazine From Star Wars-themed jets to precision-matched Disney liveries, Michael Suhara is shaping the future of aerospace coatings — one aircraft at a time. In this article, Suhara, Senior Technical Service Coordinator for Aerospace Coatings at AkzoNobel, shares insights from nearly 30 years in the industry. Based in Seattle, […]
We’re excited to announce the relaunch of our Diploma in Coatings for Corrosion Control — a prestigious, globally recognised qualification that bridges the gap between coating inspection certifications and university-level corrosion engineering. Launching on 1st September 2025, the diploma has been completely refreshed, restructured and updated to reflect the latest industry standards. Plus, if you […]
Damen Shiprepair Dunkerque Introduces Autonomous Blast & Paint Robots Following successful trials, Damen Shiprepair Dunkerque has implemented five cutting-edge Autonomous Mobile Blast & Paint Robots (AMBPR) – marking a significant step forward in shipyard surface preparation and coating application. Designed specifically for ship repair environments, these robots offer enhanced safety, efficiency, sustainability, and cost savings. […]
The Importance of Abrasive Blast Cleaning in Protective Coatings Abrasive blast cleaning plays a vital role in surface preparation across a wide range of industries, from marine and offshore to petrochemical and construction. It is one of the most effective methods of preparing a substrate to ensure maximum adhesion and performance of protective coatings. In […]
Maximise Training Budgets with CITB Funding If you’re a CITB-registered employer, there’s some great news — you could be significantly reducing the cost of your staff training through CITB funding support. Whether you’re a small business looking to upskill a handful of employees, or a company managing long-term workforce development, there are two major routes […]
Corrodere Academy and PFPNet launch new Passive Fire Protection Inspection course Corrodere Academy is proud to launch a new course developed in partnership with PFPNet, focused on inspection of passive fire protection (PFP) coatings used in hydrocarbon industries. This Level 2 course is designed for Coating Inspectors working in oil, gas, and energy, offering training […]
The coatings industry in Australia is experiencing rapid change, with increasing demand for skilled professionals and a growing need for industry-aligned training. We caught up with Jim Ragg – Training Manager at JMK Training, one of our newest Train the painter affiliate providers, to learn more about their goals, experience, and vision for supporting the […]
Atlas Coating joins Train the painter as a Registered Company for Powder Coating Application training We’re excited to announce that Atlas Coating has come on board as a Registered Company of our Powder Coating Application course. By delivering the Powder Coating Application course through the internationally recognised Train the painter programme internally to employees Atlas Coating […]
Following the recent announcement of RAMP Training Group becoming an Affiliate Training Provider of the Train the painter programme we spoke to John Kruse (Director at RAMP Training Group) about the impact of this and their plans to deliver the programme. With over 15 years’ experience in the protective coatings industry – alongside a strong […]
Read More… from Affiliate Training Provider Spotlight: RAMP Training Group
Corrodere Academy is proud to announce that it has officially become an Approved Training Organisation (ATO) with the Construction Industry Training Board (CITB). This recognition is testament to our commitment to providing high-quality training for professionals in the coating and corrosion industries. What is a CITB Approved Training Organisation (ATO)? A CITB ATO is an […]
Read More… from Corrodere Academy Achieves CITB Approved Training Organisation Status
Q&A with Rebecca Law, Director at PSI Global Training This International Women’s Day, we’re celebrating women making an impact in the protective coatings industry. One of those inspiring women is Rebecca Law, Director at PSI Global Recruitment—one of our Train the painter affiliate providers. Rebecca played a key role in establishing PSI Global Training, adding […]
Read More… from International Women’s Day: Q&A with Rebecca Law
Radii Planet Group, the global manufacturer of aluminium partitions, has become one of the first to use Flightpath Pro, a software developed by coatingAI in close partnership with AkzoNobel Powder Coatings to improve an organisation’s coating line performance and enhance product excellence. Flightpath Pro helps deliver a more uniform, consistent coating in application, accommodating variabilities […]
Read More… from Radii Planet Group adopts new AI-powered Interpon service
Powder coatings are a type of coating that is applied as a dry, fine powder to produce high quality and durable finishes. Unlike conventional liquid coatings and paints, which are typically applied via a brush or roller, powder coatings are applied as a free-flowing powder that streams smoothly and evenly. This application can either be […]
Read More… from Corrodere Academy launch new Powder Coating Application course
The hot-dip galvanising industry has provided reliable corrosion protection for steel structures for nearly 187 years, with lifespans of up to 110 years in some environments. However, modern architects and designers are increasingly demanding an “architectural finish” that combines durability with visual appeal. Nick Karakasch, retired principal of Total Corrosion Consultants, highlights how the natural […]
The Tyne Bridge restoration has reached an exciting milestone with the unveiling of its first section of new green paint. This marks a significant moment in the restoration of the iconic structure, which has been a defining symbol of Tyneside since its opening by King George V in 1928. Extensive work has been carried out […]
Corrodere Academy renews 10-year partnership agreement with the Institute of Corrosion to continue providing accredited courses Corrodere Academy, a global provider of coatings and corrosion control training and certification, recently signed a 10- year partnership agreement with the Institute of Corrosion (ICorr). This long-term collaboration will ensure Corrodere continue to provide industry professionals with […]
Read More… from Corrodere renews 10-year partnership with ICorr
Next year will mark 10 years since CAKE Commercial Services joined the Train the painter programme. In this time they have utilised our multitude of training programmes to ensure their employees develop the highest-quality skills and knowledge the industry has to offer. This week, we have chosen to spotlight CAKE and the work their team […]
Read More… from Spotlight on our Registered Companies:
Cake Commercial Services
Specialist Coatings and Inspection (SCI) are now in their second year as a Registered Company of Train the painter. Delivering Train the painter courses to their staff in-house is key to ensuring high standards of excellence to their clients. SCI specialise in the three key stages of coating services within the construction industry: surface preparation, […]
Read More… from Highlighting our Registered Companies:
Specialist Coatings and Inspection (SCI)
Some climates such as those in GCC (Gulf Cooperation Council) countries make it extremely difficult to build structures with long service lives. Hot temperatures and other harsh elements make corrosion a constant threat to the durability of reinforced concrete. Rather than default to expensive options such as epoxy-coated rebar and extra-thick concrete cover, Cortec’s MCI Technology […]
Read More… from Slowing down corrosion in high temperature states
GDI, an award-winning provider of applied technology solutions, has now added the use of the Skygauge drone to its range of marine sector capabilities. GDI has now added the use of the Skygauge drone to its range of marine sector capabilities. By adding airborne robotics, GDI can now take ultrasonic thickness measurements of large uncoated […]
Greek Engineer Eleni Boviatsi has a PlayStation setup as her workstation. Her current throne is in Norway, where she in on a short-term assignment playing with Jotun’s greatest innovation. Boviatsi puts on a big smile and says: “When I tell people what I do for a living, they usually go Wow!” The 30-year-old, who joined […]
Corrodere Academy name Steven Slack student of the year Our 2023 student of the year is Steven Slack – Director of Operations at Ferrous Protection. Steven has been a student at the Corrodere Academy for a number of years and over this time has gained 3 Train the painter qualifications and studied 6 inspection and […]
The last surviving Dreadnought-class battleship, USS Texas, is being painstakingly restored in Galveston, Texas. In the course of the work, a World War II operations map was discovered on a cabin wall, having been painted over and later cut into. Ariane Roesch and Zak Miano, who own OnAim Conservation, took careful steps to fully reveal […]
Liverpool based PSI Global have launched a training facility following their affiliate membership with Train the painter. PSI Global Group are pleased to announce the launch of the new PSI Global Training Limited. The new division offers the first Train the painter training facility to be located in Liverpool and the North West, and has […]
Read More… from PSI Global Group launches first of its kind training division
Corrodere Academy introduces a new Powder Coatings course to the Train the painter programme The coating industry is continually evolving, with advancements in technology and materials pushing the boundaries of what is possible. To ensure that professionals are equipped with the latest knowledge and best practices, continuous training and upskilling is essential. Recognising this, we […]
The icebreaker MSV Nordica, owned by Arctia, is known for its role in securing Finland’s winter maritime transport. Following the icebreaking season, Nordica underwent maintenance at the Turku Repair Yard in May. A ship travelling through ice is exposed to severe mechanical stress, so during drydocking the underwater hull and topside of the icebreaker were […]
Read More… from Nordica comes in from the cold for a fresh coat of durable paint
Sasol employees are the first in South Africa to qualify as ICorr level 1 coating inspectors with training from the Corrosion Academy and IRT Training 11 metallurgists from Sasol have successfully completed our ICorr Level 1 Coating Inspector course, marking the first delivery and completion of this course in South Africa. Understanding the intricacies […]
Read More… from Sasol employees qualify as ICorr Level 1 Coating Inspectors
Earlier this month, we had a great time at the Careers Fair at St Mary’s Stadium in Southampton! Thank you to all the attendees who came by to chat – it was fantastic getting to know you all. A big thank you also to Nick Allen and Akzonobel for supplying the VR spray painting machine. […]
A study commissioned by the Water Jetting Association (WJA) into the management of high-pressure fluid injection injuries has become one of the most important research papers on the topic in the world. The study has been accessed online more than 10,000 times since it was published in 2019, and has been cited in five specialist […]
Read More… from Water Jetting injury research achieves global reach
Agricultural equipment is constantly exposed to tough climate and weather. For this reason optimal paint preparation is essential to ensure the equipment can hold up under such harsh conditions. A custom-engineered continuous-feed spinner hanger blast machine RHBD-K 22/27-HD, installed in a new factory of a globally active manufacturer, is making a significant contribution towards the […]
Sherwin-Williams’ pioneering Resuflor high-build epoxy floor coating system has been successfully applied at a hangar in Teesside International Airport in the UK. Teesside International Airport is the location for the Royal Air Force (RAF)’s Interim Red Air Aggressor Training Service (IRAATS). A Resuflor Topcoat system has been used to ensure a reliable and robust […]
Read More… from The sky’s the limit for an epoxy floor coating system
Our Coating Survey course is endorsed by ICorr and accredited by Lloyd’s Register and the Royal Society of Chemistry. Written by industry experts and accessed and examined online, this course will set the standard for those who conduct coating surveys as part of their responsibilities. Coating surveys are also covered as a part of our […]
Read More… from What is a Coating Survey and why is it crucial?
Robust and long-lasting, DAF trucks are renowned worldwide for their reliability and high performance. A small part of this reputation is down to Hempel’s waterborne Beltidra 2C Topcoat, which protects the trucks’ chassis and axles from the environment. DAF Trucks NV is a technology company and one of Europe’s premier commercial vehicle manufacturers. Its light, […]
SWISS has decided to equip its entire Boeing long-haul fleet with the fuel-saving AeroSHARK surface technology Starting in the middle of the year, a total of 12 Boeing 777-300ERs will gradually be fitted with the riblet films developed jointly by Lufthansa Technik and BASF. The significantly reduced frictional resistance resulting from this modification will make […]
The Orbital O2 recently celebrated a year since its launch date and approximately 10 months delivering power for the UK grid. The Orbital O2 is a significant milestone not just for the tidal sector, but for the development of renewable energy technology in general. Designed by Scottish engineering company Orbital Marine Power, Ltd (Orbital), the […]
One of the world’s best-loved ships and a national treasure, HMS Victory has reached a hugely significant conservation milestone in the 10-year-long project to ensure she is protected for the next half century. The ship has been partially enclosed by temporary scaffolding. A century after Vice-Admiral Lord Nelson’s flagship at the Battle of Trafalgar was […]
The focus on developing products which meet the needs of supply chains in a sustainable future has never been more acute. Carl Burrell, Global Product Director – Fire at Sherwin-Williams Protective & Marine Coatings, examines how innovation is generating new products which support the practical and environmental demands of all concerned. In this article, he covers […]
Read More… from Raising standards, protecting lives and property
Due to industry demand we are excited to announce the launch of our brand new online course – Corrosion Under Insulation Specialist The importance of managing corrosion under insulation Corrosion Under Insulation (CUI) is defined as corrosion of a steel structure such as pipes, vessels, low alloy, austenitic stainless steel, or tanks fabricated from carbon. […]
Read More… from Corrosion Under Insulation Specialist Course
The stakes of corrosion in the oil and gas industry can be astronomical, ranging from high maintenance and repair costs, to downtime and profit loss, to safety hazards from oil and gas leaks. The simple culprit: metal reacting with oxygen and moisture, degrading it back to its natural state. The logical solution is to implement […]
Read More… from A logical solution to oil and gas industry corrosion
We are pleased to announce the launch of our popular Pipeline Coating Inspector and Insulation Inspector courses with ICorr accreditation. This is the first time ICorr accredited Pipeline and Insulation Inspector courses have been available online, offering flexibility and saving time and money when compared to classroom learning. The importance of monitoring pipelines Pipelines are […]
Read More… from Corrodere academy launch Coating Inspector courses with ICorr accreditation
Join this elite class of Coatings Specialists by enrolling on to the highly respected Diploma in Coatings for Corrosion Control For just £2,750 £2,200 +VAT enhance your specialist protective coatings career opportunities by acquiring this advanced and globally recognised qualification. (Discount applied if booked by 31st January – limited spaces are available!) Distance learning allows […]
Read More… from 20% off Diploma in Coatings for Corrosion Control course fees
We are delighted to announce that three of our Train the painter training courses are now eligible for Construction Industry Training Board (CITB) funding… Achievement date before 1st April 2023 Protective Coatings Applicator attracts £120 of funding Abrasive Blast Cleaner attracts £70 of funding Spray Painter attracts £70 of funding Achievement date on or […]
Read More… from Train the painter now eligible for CITB funding
This December you can receive 15% off our Corrosion Management course, leading to a more sustainable future. Within 12 months you can become an expert in corrosion, corrosion engineering and integrity management in the hydrocarbon industry with the following skills – Fully understand and appreciate the corrosion management concept and its implementation process Be able […]
Read More… from A Christmas present from the Corrodere Academy!
Airblast Eurospray has launched the AbVac Grit Recovery Unit, a portable abrasive recovery unit capable of removing anything from dust up to 50mm debris. Available with a wide range of flexible hoses, tools and extensions, this powerful suction unit allows operators to recover spilt abrasive quickly and efficiently, without the back-break of manual recovery. This […]
